{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
通径: 2.5, 2, 1.5 in
温度: -20 °C - 60 °C
Ridart Model 62 Angle check valve are designed to prevent the drain of fuel (loss of prime)in the suption line and allows its flow only to appenser.这个阀门安装在地下储罐的井盖上。阀门安装在地下储罐的井盖上。 在将管道固定到阀门之前,请务必在入口和出口管道上的螺纹上使用耐汽油化合物。 请勿使用PTFE管道胶带,这可能会导致安装过程中的过紧,并导致阀门断裂。 仅使用按照欧洲标准制造的连接部件(进/出管道或装置),以避免连接错误造成阀门或管道损坏而可能造成危险状况的风险。
通径: 2 in
温度: -20 °C - 60 °C
... 不锈钢角形止回阀 RIDART 的设计目的是防止吸油管中的燃料排出(原油损失),并允许产品只流向加油机。 阀门通常安装在储油罐的人孔盖上。 该阀完全由不锈钢制成,适用于特殊燃料、碱或刺激性溶剂和化学品。 尺寸:2 英寸 角度止回阀是符合 2014/34/EU 指令和协调标准的设备。 意大利制造 ...
通径: 15 mm - 300 mm
压力: 16, 25, 10, 40, 6 bar
温度: -60 °C - 450 °C
为提升搜索质量,您认为我们应改善:
请说明:
您的建议是我们进步的动力:
剩余字数