工程切割工具
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
除了大多数需要直通孔的部件外,还有许多部件需要盲孔,并通常需要在内孔底部钻出某种形状。Sunnen凭借丰厚的工程专业知识,为您设计和制造专用于此类部件的粗加工成形工具。 成形镗孔工具通常用于初始的粗加工刀具操作,此外也可用于粗加工盲孔结构的近似形状。此步骤是为了削除尽可能多的材料,以方便后续的模板钻孔操作。无论是圆角半径、全球半径、阶梯平底孔,还是需要长锥度的孔,Sunnen皆可提供适用于所有孔结构的成形工具,这些工具配备一系列成形刀具,无论是钎焊到位、可更换的再磨成形刀具,或是适用于所需成形的特殊可转位成形刀具。
... 移动车间 UMAT 2 我们向您介绍可能是世界上最小的维修车间。有了我们的新型便携式软管维修车间 UMAT 2,您就可以随时拥有一切。洗碗机大小的工作站,精密的机器布局,可以放在旅行车的后备箱中,随时使用。使用 UMAT 2,可以加工任何液压软管,最大尺寸为 1″ 4 SP 和 1 ¼" 2 SN,从原材料到可随时安装的软管总成。切割和压接--全部使用纯电池或肌肉力量。当然,一切都以 UNIFLEX 一贯的质量为前提。 ...
... 工程切削刀 具采用 rigorouis 设计和合理选择材质,采用多项专利 技术,在工艺上非常完美。 我们拥有种类繁多的规格从 13"-21"。 Wirth、Herrenkecht、 小松、NFM 等的 TBM 和盾构机圆盘切割机可以更换, 进口的 TIMKEN 轴承能够确保大承载能力和长寿命。 采用进口或国内著名的密封件和进口润滑油以确保 可靠的密封性能。 滚刀可应用于各种岩石板(从 20 到 300Mpa)。 可根据客户的要求或根据 施工地层条件制作定制滚刀。 ...
为提升搜索质量,您认为我们应改善:
请说明:
您的建议是我们进步的动力:
剩余字数