- 电学、电子和光学设备 >
- 电缆,接头和外壳 >
- EtherCAT耦合器
EtherCAT耦合器
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... 正常运行的 TB20 配置总是需要一个总线耦合器和至少一个外设模块。 通过 EtherCAT 总线耦合器,可以使用 EtherCAT 协议访问外围模块的数据。 它最多可容纳 64 个与总线耦合器串联的各种模块。 它能检测插入的外围模块,并自动将相应的 I/O 数据分配到 EtherCAT 映射中。 EtherCAT 总线耦合器支持模块化设备配置文件。 1,024 ...
... - 最多可连接 10 个 I/O 模块,共 80 个测量通道 - 模块供电 - 用于 KiDAQ 便携式外壳 为了连接 EtherCAT 主站和 KiDAQ 测量模块,需要使用 5553A 型总线耦合器。它为模块供电,并将标准以太网转换为定义的 EtherCAT LVDS(低压差分信号)。 ...
... 系列总线耦合器用于将传统的现场总线系统连接到 EtherCAT。超高速 I/O 系统有大量端子模块可选,除了可用于 EtherCAT 之外,现在也可用于其它现场总线和工业以太网。采用 EtherCAT 能够实现非常灵活的拓扑结构配置。由于以太网的物理特性优越,也可以进行长距离连接,不会影响总线速度。如果换到现场层(无控制柜),EKxxxx 也可连接 IP 67 EtherCAT ...
Beckhoff Automation
EtherCAT 耦合器用于连接 EtherCAT 协议与 EtherCAT 端子模块。由于 EtherCAT 系统中的通信直达最后一个端子模块,耦合器只转换物理层,无需改变过程数据流。 有三种不同的技术可供选择: EtherCAT:超高速通信标准 EtherCAT ...
Beckhoff Automation
... 负载监控 EtherCAT 总线耦合器 用于 LCOS CCI 和 LOCC-Box 的 EtherCAT 总线耦合器 注意:必须为总线耦合器订购带电源 (FTE) 的相应 LCOS 功能载体。 1. 如果该 EtherCAT 总线耦合器 (778000.1401) 用于控制 LCOS CCI 系统:FTE 3 极: 780713.575.1(工作电压:最大 DC ...
GCAN-IO-8200 EtherCAT IO耦合器可用于连接EtherCAT系统和分布式总线终端模块,这些终端模块可以模块化方式进行扩展。一个完整的节点由一个总线耦合器、1-32个任意数量的IO模块和一个端子模块组成 GCAN-IO-8200 EtherCAT IO 耦合器使用符合 ISO 11898 的 CAN 总线协议。GCAN-IO-8200 CANopen ...
为提升搜索质量,您认为我们应改善:
请说明:
您的建议是我们进步的动力:
剩余字数