大型法兰
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
标准直径: 50 mm - 1,200 mm
... 迪尼科拉联轴器,以宽范围联轴器的形式,设计用于连接各种外径相同或不同公称孔径的管道。由于外径公差范围大(最高可达23mm),一个迪尼科拉接头可以连接钢、球墨铸铁、UPVC、铸铁、石棉水泥和其他刚性管道材料。 说明 通用的管道法兰适配器,专门设计用于连接不同外径和材料的平头管道,消除了对焊接接头的需求。 因此,由于在困难的条件下也能方便快捷地进行安装,从而降低了安装成本。 特点 设计用于容纳不同外径的管道,无需更换垫片,它们减少了库存,因为一个接头可以连接钢、球墨铸铁、PVC、铸铁和石棉混凝土管道。 -即使在不规则的管道表面也能达到完美的密封效果 -管道的最大轴向位移:5毫米 -本体和端环的Rilsan涂层消除了进一步保护的需要。 本体和端环的涂层消除了进一步保护的需要,如单点包覆j 由于具有较高的抗腐蚀和抗冲击能力。 -最大的工作压力:16巴 -总的角度偏移为+/-3度,允许在地面沉降等管道运动的情况下。 地面沉降等管线运动。 -适用于饮用水的橡胶垫圈和涂层。 -法兰钻头与NP10和NP16都兼容。 ...
... 只有在压力、温度和尺寸要求超出标准法兰能力的情况下,才会使用非标准法兰。最常见的此类应用是大型设备法兰和热交换器本体法兰。 ...
TECNOGROUP
... 旋转法兰适用于石油、天然气、碳氢化合物、水、化学品和其他要求苛刻的流体,如石化和水管理应用。 ...
TECNOGROUP
为提升搜索质量,您认为我们应改善:
请说明:
您的建议是我们进步的动力:
剩余字数